Dryer Takes Two Cycles to Dry? Airflow Checks

Dryer Takes Two Cycles to Dry? The Airflow Clues Homeowners Should Check First

Quick Answer If your dryer takes two cycles to dry, the most likely causes are restricted airflow, a clogged lint screen, a crushed or lint-filled vent, an overloaded drum, clothes entering the dryer too wet, or a sensor cycle ending too early. Start [...]

Washer Walking Across the Laundry Room? How to Calm a Shaking Machine Before It Breaks Something

Quick Answer If your washer is walking across the laundry room, shaking violently, or banging during spin, the most common causes are an unbalanced load, a single bulky item, an overloaded drum, an uneven floor, loose or misadjusted leveling legs, sh [...]

Ice Maker Not Making Ice? What to Check Before the Freezer Gets the Blame

Quick Answer If your ice maker is not making ice, start with temperature and water supply. The freezer must be cold enough, the ice maker must be turned on, the water valve must be open, the water filter must not be clogged, the ice bin must be seate [...]

Washer Won't Spin? How to Tell If It's a Load Problem, Drain Issue, or Repair

Quick Answer If your washer won't spin, the most common causes are an unbalanced load, an overloaded drum, a low-spin or no-spin cycle setting, a washer that has not fully drained, a clogged pump filter, a kinked drain hose, a lid or door lock proble [...]

Microwave Runs but Does Not Heat? Why It Happens and When Repair Makes Sense

Quick Answer If your microwave runs but does not heat, the problem is usually not the turntable, light, or timer. The most common causes are a failed magnetron, high-voltage diode, capacitor, transformer or inverter issue, door switch problem, contro [...]

Blog